Learn how to calculate your electricity bill accurately using your meter reading. This guide covers all DISCOs, NEPRA tariff slabs, FCA, and proven saving tips.
Learn how to calculate your electricity bill accurately using your meter reading. This guide covers all DISCOs, tariff slabs, FCA, and saving tips.
1. Set AC to 26°C
Each degree below 26 increases consumption by 8%. Use fans to feel cooler.
2. Install Solar Net Metering
Cut your bill by 70-90% with a 5kW system. Payback 3-5 years.
3. Replace all bulbs with LED
LEDs use 80% less electricity than incandescent bulbs.
4. Unplug idle electronics
TV, chargers, routers on standby consume 5-10% of total bill.
5. Monitor your meter mid-month
If approaching 180 units, reduce usage to stay under 200.
6. Use ceiling fans instead of AC when possible
Fan consumes only 70W vs AC 1500W.
7. Set geyser temperature to 50°C
Reduces water heating cost by 20%.
8. Use natural light during day
Open curtains to avoid artificial lighting.
9. Wash clothes with cold water
Heating water uses 90% of washing machine energy.
10. Get energy-star rated appliances
Inverter ACs & refrigerators use 40% less electricity.
11. Clean AC filters monthly
Dirty filters increase energy use by 15%.
12. Insulate your roof
Thermal insulation reduces AC load by 30%.
13. Run heavy appliances after 11 PM
Off-peak hours may have lower rates in some DISCOs.
14. Turn off lights when leaving room
Simple habit, big impact.
15. Use pressure cooker or microwave
Cooks faster, uses less electricity than electric oven.